Loading...
  • vanity unit with toilet,vanity unit with sink,vanity unit,bespoke vanity unit,bathroom vanity unit

Louise Large Vanity Unit & Toilet Combination | Sit On Sink(s)

From: £1,850.00

The popular Louise Vanity Unit from Harvey George gives you maximum storage potential and helps keep all those messy bathroom items hidden from view. Featuring soft close doors and drawers throughout you’ll never run our of convenience space to keep all your ‘things’

The door and drawer configuration varies depending on size ordered. The toilet housing stands at 500mm wide and provides a removable front fascia for access to the cistern space.

Our painted vanity combination unit is perfect either for bathrooms limited on space which require convenient storage practicality & even for larger bathrooms where the toilet and sink are located in the same area and a combined piece of furniture helps make this area a feature of the room.

DESIGN NOTE:

Cabinet is always 15mm narrower than the worktops finished width. Example a 1200 wide worktop would make the cabinet 1185mm wide to allow an overhang on each side. Any plinths when added then increase the cabinet width by 36mm (18mm for each plinth) please ensure this is taken into consideration when planning your space.

EXAMPLE , 1185 + 36MM = 1221MM IN TOTAL

With a Solid Surface Countertop in a choice of colours and a quality undermounted ceramic or even solid surface sink, you can now have a bespoke, painted in any colour piece of bathroom furniture that creates an impressive look.


  • Why settle for less? Here at Harvey George Furniture we offer a wide range of sizes suited to most bathrooms so you are sure to find the perfect Vanity Unit for your bathroom space!

    PAINTED FURNITURE LEAD TIME: Our lead time is displayed on each product.

    Looking for a completely bespoke size? then we have you covered too - our bespoke size upgrade option is perfect for those who prefer to have things made to a specific set of dimensions. For a small charge you can input your own sizes and have YOUR BATHROOM FURNITURE - YOUR WAY! 


    *Combination Unit

    Reset options
  • Furniture Colour Matching Paint ServiceOur paint colour matching service gives customers ultimate flexibility when choosing which paint colour to use for their furniture. We colour match to ANY PAINT COLOUR whilst also offering a core range of our own colours shown below...


    COLOUR GUIDANCE

    COLOUR GUIDANCE: The swatches below are meant only as a guide - it is always advisable that you research colour or check a swatch card where possible. Lighting can affect the appearance of paint colour significantly and so if wishing to match very closely to a colour then please call us to discuss in detail or send us a painted out sample to match to.

    OUR PAINT FORMULA

    PROFESSIONAL PAINT FORMULATION: Rest assured that our professional paint formulation is superior to many paints in use today and will provide longevity in the humid conditions of bathrooms and kitchens

    * My chosen paint colour is...


    * Bespoke Colour Choice...


    We can colour match to any you like. But if it advisable to send us a painted sample or swatch card so we can match more closely to it.

    Please type the BRAND NAME and COLOUR NAME/REF of your desired paint match below...

    • Bespoke Paint Matching Charge (added to total)

    * Provide colour later...


    As we work to a 6 week lead time, we can commence production of your unit and allow confirmation of colour upto 2 weeks later. Any delay beyond that will affect your production and delivery date.

    NOTE: If choosing a none standard colour then please choose the BESPOKE COLOUR option instead.

  • Solid-Surface-Icon

    Our stunning range of 20mm thick Solid Surface Vanity worktop designs are easy to care for, install & maintain. These granite/marble/quartz like surfaces are nonporous so are ideally suited to the bathroom & humid environments.


    WORKTOP MEASUREMENTS

    All solid surface tops are recommended to overhang the front and sides of a vanity unit. The width of your furniture is reduced by 15mm to allow a 7.5mm overhang left and right. All vanity unit worktops also overhang the front by 15mm so a 500 deep unit will have a 515mm deep worktop (all sizes are +/- 3mm manufacturing tolerance).

    * My chosen solid surface is...


    Click on the magnifying glass in each swatch to see a picture of each up close. Please note that patterning where present will vary slightly.

  • Co-ordinate your vanity unit worktop with a matching decorative upstand. Provides a nice finish against tiled, pannelled or even painted walls. Larger upstands can also be drilled to accommodate wall mounted taps.


    UPSTAND MEASUREMENTS

    The width of your upstand will be matched to the width of the vanity unit ordered and made to the height you choose.

    * Do you want an Upstand? ...


    * Pick an Upstand Size below ...


  • Sink-IconIn this section you can configure all options relating to your chosen vanity unit design. Select a sink style, choose tap cut outs if needed and even complete the look with a matching upstand. Be sure to scroll through each option and make choices that suit your look.


    * Sink options...


    * Choose a Twin Sink Style...


    * Stone Resin Sinks (set of two)...


    * Ceramic Sinks (set of two)...


    * KRION™ Seamless Sinks (set of two)...


    * Select a Sink Style ...


    * Stone Resin Sinks...


    * Ceramic Sinks...


    *KRION™ Seamless Sinks...


    * Own Sink Information...


    * Upload Sink Information file...


    Please provide a file with details of the sink. It is important you provide the correct details as this will be used for manufacture.

    Acceptable file formats are PDF or JPG Files


    • ADDS A MANUAL CHECK CHARGE

    * Provide a link to another website...


    You may cut and paste a website link below which shows us the sink you have selected. Please note that we can only use this if it provide size information.


    • ADDS A MANUAL CHECK CHARGE

    * Your sink size information...


    If providing your own sink we will cut the worktop based on your instructions here. It is important you provide a Width, Height and Depth measurement, as well as where the waste hole is in relation to the sink.


    • ADDS A MANUAL CHECK CHARGE

    No drilling of worktop...


    We will provide your worktop finished on the surface and edges only. No drilling or cut outs will be provided. Your fitter can cut the material onsite using standard worktop tools safely.

    * Choose Tap Hole Position...


    If you are planning on using taps which fix onto the vanity unit then simply tell us where you would like them. If wall mounted taps then select none required.


    * Need a Sink Waste?...


    * Choose a Sink Waste...


    * Choose a Sink Waste (set of two)...


    * Add Uniwaste™ Waterless Trap?


    A great alternative SPACE SAVING plumbing fixture to standard U-Bend bottle traps and more expensive metal alternatives.


    * Add a Space Saving Trap (set of two)?...


    * Add a Space Saving Trap?...


    * Add Overflow Caps?...


    * Choose an Overflow Cap...


    * Choose an Overflow Cap (set of two)...


  • Bathroom Taps Harvey George Furniture Makers

    When purchasing taps it is important to understand that whilst many taps look the same, there are wildly different levels of quality. Rest assured our range is hand picked to offer different price points which in turn offer different guarantee periods.


    * Does your design require one or two taps?

    *Type of Taps Required


    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Set Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Set Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



  • Left or right

    Please select which side you would like your W/C, as you look at it from the front do you want the toilet on the left or right? Also, please advise how wide to make the toilet section as shown.


    * Please select Left or Right...


    * Please select width of Toilet Housing...


    * Do you need a Toilet Pack and Cistern set?