Loading...
  • Harvey George Furniture

Larsen Stone | Scandi Plywood Vanity Unit | Sit On Sink

From: £1,045.00

Meet our Scandinavian Inspired “Larsen Stone Vanity Unit” a stunning piece of bathroom furniture that brings soft tones and clean lines into your bathroom. Constructed from Birch Plywood by our craftsmen, this Nordic design vanity unit provides the ultimate in convenient storage of all those bathroom essentials. This model comes with a luxurious solid surface stone countertop and can be paired with any of our sit on sinks to create the look you want.

Plywood is super strong and can withstand the rigours of daily life. High quality and sustainable Birch Faced Plywood is used throughout its construction, finished by hand and lacquered with what we call a “Dead Matt Lacquer” which gives the piece a stunning warm tone and hardwearing surface protection. This piece of bathroom furniture will provide years of use, stay looking great and has a super easy minimal care routine.

Picture the soft fluffy towels in the open storage below, and when inside the cabinet you can see great use of the space inside to keep everything nice and organised within the soft closing drawers. Take your bathroom design to the next level and compliment this unit with co-ordinating brassware, accessories and matching storage solutions.

Cabinet Dimensions: Height 750mm | Width: Various | Depth 500mm

    Reset options
  • Solid-Surface-Icon

    Our stunning range of 20mm thick Solid Surface Vanity worktop designs are easy to care for, install & maintain. These granite/marble/quartz like surfaces are nonporous so are ideally suited to the bathroom & humid environments.


    WORKTOP MEASUREMENTS

    All solid surface tops are recommended to overhang the front and sides of a vanity unit. The width of your furniture is reduced by 15mm to allow a 7.5mm overhang left and right. All vanity unit worktops also overhang the front by 15mm so a 500 deep unit will have a 515mm deep worktop (all sizes are +/- 3mm manufacturing tolerance).

    * My chosen solid surface is...


    Click on the magnifying glass in each swatch to see a picture of each up close. Please note that patterning where present will vary.

  • Co-ordinate your vanity unit worktop with a matching decorative upstand. Provides a nice finish against tiled, pannelled or even painted walls. Larger upstands can also be drilled to accommodate wall mounted taps.

    UPSTAND MEASUREMENTS

    The width of your upstand will be matched to the width of the vanity unit ordered and made to the height you choose.

    * Do you want an Upstand? ...


    * Pick an Upstand Size below ...


  • Sink-Icon

    In this section you can configure all options relating to your chosen vanity unit design. Select a sink style, choose tap cut outs if needed. Be sure to scroll through each option and make choices that suit your look.


    * Choose a Sink Style...


    * Ceramic Sink Choices...


    * Stone Sink Choices...


    * KRION™ Seamless Sinks...


    * Using Own Sink Options...


    * Upload Sink Information file...


    Please provide a file with details of the sink. It is important you provide the correct details as this will be used for manufacture.

    Acceptable file formats are PDF or JPG Files


    • ADDS A MANUAL CHECK CHARGE

    * Provide a link to another website...


    You may cut and paste a website link below which shows us the sink you have selected. Please note that we can only use this if it provide size information.


    • ADDS A MANUAL CHECK CHARGE

    * Your sink size information...


    If providing your own sink we will cut the worktop based on your instructions here. It is important you provide a Width, Height and Depth measurement, as well as where the waste hole is in relation to the sink.


    • ADDS A MANUAL CHECK CHARGE

    No drilling of worktop...


    We will provide your worktop finished on the surface and edges only. No drilling or cut outs will be provided. Your fitter can cut the material onsite using standard worktop tools safely.

    * Choose Tap Hole Position...


    If you are planning on using taps which fix onto the vanity unit then simply tell us where you would like them. If wall mounted taps then select none required.


    * Need a Sink Waste?...


    * Choose a Sink Waste...


    * Add Uniwaste™ Waterless Trap?...


    A great alternative SPACE SAVING plumbing fixture to standard U-Bend bottle traps and more expensive metal alternatives.


    * Add a Space Saving Trap...


    * Add Overflow Cap?...


    * Choose an Overflow Cap...


  • Bathroom Taps Harvey George Furniture Makers

    When purchasing taps it is important to understand that whilst many taps look the same, there are wildly different levels of quality. Rest assured our range is hand picked to offer different price points which in turn offer different guarantee periods.


    * Does your design require one or two taps?

    *Type of Taps Required


    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Set Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Set Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...


  • Harvey-George-Handles-&-KnobsYour furniture can be customised with a wide range of standard handles in various finishes.

    Wanting something a little different? Then select the upgrade option when you have finished configuring your furniture. You can then browse our full range of premium handles and add the quantity you need.


    * Handle Choices ...


    * Standard Knobs Selection...


    PLEASE NOTE: Standard placement of Knobs are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the edge of doors.


    * Standard Cup Handle Selection...


    PLEASE NOTE: Standard placement of Cup Handles are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the top edge of doors or the inside of a shaker panel.


    * Standard Cup & Knob Handle Selection...


    PLEASE NOTE: Standard placement of Cup Handles are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the top edge of doors or the inside of a shaker panel. Standard placement of Knobs are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the edge of doors.


    No drilling for handles...


    No-Drilling-Handles-Icon
     Thanks for indicating you do not require any drilling in your doors and drawers. This choice is for when you have your own handles and you don't want us to drill the furniture for handles giving you freedom to fit handles yourself.

    Choose an Upgrade...


     We have a large range of other handle styles if you are looking for more variety. Please complete building your unit and once added to the cart, you can visit our handle section and choose an alternative style/finish.

    Send us handles...


    Send-us-your-handles We understand how you may already have handles for your furniture. We can install them for you if you send to us in time. Simply package them well and send recorded delivery to us:  Harvey George, The Old Rudding School, Rudding Lane, Harrogate. HG3 1DQ marking with your name and order number. Please note that we cannot accept any liability for loss or damage when sent to us.

  • We can make most furniture items with bespoke elements but these must be pre-agreed with our team to ensure the construction and components used will work.

    IMPORTANT NOTE: If you are changing the dimensions of a unit, the first step is to select the size above what you need at the top of this page. You can then advise us of the new sizes to scale down to in the boxes below.


    * Order Details Confirmation...

    Please choose from the options below or if the order detail above is as per your selections then simply choose "ORDER IS GOOD TO GO"

    *ADDITIONAL ORDER NOTES:


    Please provide any further details relating to this item only. This area is not for providing size information (select a different option above if you need that)

    Please proceed & Add to Basket...

    *Bespoke Height (mm)

    Height

    *Bespoke Width (mm)

    Left to Right

    *Bespoke Depth (mm)

    Front to Back

    ADDITIONAL ORDER NOTES:


    Please provide any further details relating to this item only. This area is not for providing size information.

    *Bespoke Details Confirmation

Scandi SKU: Larsen_SO Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Latest from Instagram

Loading...
Dimensions N/A
Single Basin Vanity

500w x 750h x 500d, 600w x 750h x 500d, 700w x 750h x 500d, 800w x 750h x 500d, 900w x 750h x 500d, 1000w x 750h x 500d

SAVE OR SHARE THIS