Loading...
  • AVA-Painted-Vanity-Unit-in-Stone-Paint-Colour
  • Ava sit on basin vanity unit

Ava Vanity Unit with Countertop Sink | 800mm in Stone

From: £1,000.00

In Stock – Ready To Go… (SAVE £200 off Final Price)

The beautiful Ava Vanity Unit with stone countertop and choice of sinks.

Dimensions:

Cabinet | 785mm Wide x 750mm Height x 500mm Deep

Worktop | 800mm Wide x 20mm Thick x 515mm Deep

Handmade in Britain by Harvey George the Ava Vanity Unit features 2 soft closing drawers and an open shelf at the bottom.

Pair this model with a choice of co-ordinating accessories and you’ll get a stunning statement piece of bathroom furniture.

LEAD TIME: IN STOCK : Ready for Delivery in 1-2 weeks

  • Solid-Surface-Icon

    Our stunning range of 20mm thick Solid Surface Vanity worktop designs are easy to care for, install & maintain. These granite/marble/quartz like surfaces are nonporous so are ideally suited to the bathroom & humid environments.


    WORKTOP MEASUREMENTS

    All solid surface tops are recommended to overhang the front and sides of a vanity unit. The width of your furniture is reduced by 15mm to allow a 7.5mm overhang left and right. All vanity unit worktops also overhang the front by 15mm so a 500 deep unit will have a 515mm deep worktop (all sizes are +/- 3mm manufacturing tolerance).

    * My chosen solid surface is...


    Click on the magnifying glass in each swatch to see a picture of each up close. Please note that patterning where present will vary.

  • Co-ordinate your vanity unit worktop with a matching decorative upstand. Provides a nice finish against tiled, pannelled or even painted walls. Larger upstands can also be drilled to accommodate wall mounted taps.

    UPSTAND MEASUREMENTS

    The width of your upstand will be matched to the width of the vanity unit ordered and made to the height you choose.

    * Do you want an Upstand? ...


    * Pick an Upstand Size below ...


  • Sink-Icon

    In this section you can configure all options relating to your chosen vanity unit design. Select a sink style, choose tap cut outs if needed. Be sure to scroll through each option and make choices that suit your look.


    * Choose a Sink Style...


    * Ceramic Sink Choices...


    * Stone Sink Choices...


    * KRION™ Seamless Sinks...


    * Using Own Sink Options...


    * Upload Sink Information file...


    Please provide a file with details of the sink. It is important you provide the correct details as this will be used for manufacture.

    Acceptable file formats are PDF or JPG Files


    • ADDS A MANUAL CHECK CHARGE

    * Provide a link to another website...


    You may cut and paste a website link below which shows us the sink you have selected. Please note that we can only use this if it provide size information.


    • ADDS A MANUAL CHECK CHARGE

    * Your sink size information...


    If providing your own sink we will cut the worktop based on your instructions here. It is important you provide a Width, Height and Depth measurement, as well as where the waste hole is in relation to the sink.


    • ADDS A MANUAL CHECK CHARGE

    No drilling of worktop...


    We will provide your worktop finished on the surface and edges only. No drilling or cut outs will be provided. Your fitter can cut the material onsite using standard worktop tools safely.

    * Choose Tap Hole Position...


    If you are planning on using taps which fix onto the vanity unit then simply tell us where you would like them. If wall mounted taps then select none required.


    * Need a Sink Waste?...


    * Choose a Sink Waste...


    * Add Uniwaste™ Waterless Trap?...


    A great alternative SPACE SAVING plumbing fixture to standard U-Bend bottle traps and more expensive metal alternatives.


    * Add a Space Saving Trap...


    * Add Overflow Cap?...


    * Choose an Overflow Cap...


  • Bathroom Taps Harvey George Furniture Makers

    When purchasing taps it is important to understand that whilst many taps look the same, there are wildly different levels of quality. Rest assured our range is hand picked to offer different price points which in turn offer different guarantee periods.


    * Does your design require one or two taps?

    * Type of Taps Required


    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...



    * Choose a Tap Finish

    For guarantee periods on our taps, please check the individual product pages for further information.


    *Chrome Tap Selection...


    *Brushed Nickel Tap Selection...


    *Brushed Brass Tap Selection...


    *Matt Black Tap Selection...


  • Harvey-George-Handles-&-KnobsYour furniture can be customised with a wide range of standard handles in various finishes.

    Wanting something a little different? Then select the upgrade option when you have finished configuring your furniture. You can then browse our full range of premium handles and add the quantity you need.


    * Handle Choices ...


    * Standard Knobs Selection...


    PLEASE NOTE: Standard placement of Knobs are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the edge of doors.


    * Standard Cup Handle Selection...


    PLEASE NOTE: Standard placement of Cup Handles are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the top edge of doors or the inside of a shaker panel.


    * Standard Cup & Knob Handle Selection...


    PLEASE NOTE: Standard placement of Cup Handles are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the top edge of doors or the inside of a shaker panel. Standard placement of Knobs are as follows: Horizontally & vertically centred on drawer fronts, and vertically centred and 40mm in from the edge of doors.


    No drilling for handles...


    No-Drilling-Handles-Icon
     Thanks for indicating you do not require any drilling in your doors and drawers. This choice is for when you have your own handles and you don't want us to drill the furniture for handles giving you freedom to fit handles yourself.

    Choose an Upgrade...


     We have a large range of other handle styles if you are looking for more variety. Please complete building your unit and once added to the cart, you can visit our handle section and choose an alternative style/finish.

    Send us handles...


    Send-us-your-handles We understand how you may already have handles for your furniture. We can install them for you if you send to us in time. Simply package them well and send recorded delivery to us:  Harvey George, The Old Rudding School, Rudding Lane, Harrogate. HG3 1DQ marking with your name and order number. Please note that we cannot accept any liability for loss or damage when sent to us.

Latest from Instagram